for SKU.EP-KT200IIF+EP-KT200IIDG: Prime Day Sale [EU Ship] ECUHELP KT200 II ECU TCU Programmer Full Version with Offline Workstation for Car Truck Motorbike Tractor Boat [Get one Free KTflash Dongle]
€815$843.53£709.87AU$1,332.12C$1,196.99€879$909.77£765.61AU$1,436.73C$1,290.997% off
SKU: EP-KT200IIF+EP-KT200IIDG
Free Shipping
0 votes
Q:Question:I have a question. I just did the renewal for the KT200II but I haven't received the activation email yet. I installed the software. Is it normal that it refuses to open? Answer this question
A:Answer:
You have to wait a little while. You're going to hear a clap in the box, and it's going to light up. The process takes longer than with the KT200.
Go to ecuhelpshop website, download vc_resist both version x64 and x86 and latest software for kt200II. Make sure disable antivirus and firewall. If you have offline version all offline files must go to online folder. First attempt to open program with internet connection, you can follow the guide below: https://www.ecuhelpshop.com/product-technical/kt200ii-offline-software-auto-close-solution.html
By Smith SunnySELLER
on June 23, 2024
0 votes
Q:Question:Is there any monthly or annual fee for using the servers or device? Answer this question
Q:Question:Can I read and write this ECU MD1CS003 Peugeot 1.5 HDI with KT200 II? Answer this question
A:Answer:
I've done 1 MD1CS003 PSA, dated 12/2020. It was version 035, which is a newer date but older software. Versions 037 and 039 are the newer (locked) versions.
Q:Question:It's possible to read/write Volvo 2012 Sid807 by OBD? Boot? Answer this question
A:Answer:
Boot mode.
By Smith SunnySELLER
on June 5, 2024
0 votes
Q:Question:Has everyone read / write Ac Delco E87 with KT200II? Answer this question
A:Answer:
Yes, that's fine. I've done one before and noticed that some ECU files are only half the size. There shouldn't be any issues.
By Barry Rambo
on June 3, 2024
0 votes
Q:Question:BMW F10 readed TCM on obd ok, but writing get an error on the end. Any solutions? Answer this question
A:Answer:
KT200 will read and write BMW ZF 8HP via OBD and bench, but this protocol is not for cloning, only for tuning. KT200 can read/write ZF 8hp (OBD) Only flash. You need read/write Eeprom, isn and vin too. Read/write flash+coding data, but only the same tcu, only for chip tuning, need write codding data too.bench or obd2.
By James E. Broomell
on June 3, 2024
0 votes
Q:Question:Done R8 v10 5.2L Med9.1 ( Master and slave ecu ) on OBD/bench? Answer this question
0 votes
Q:Question:Does the KT200 programmer not write the file if the checksum is wrong? Answer this question
A:Answer:
It will write the file even if the checksum is wrong. If you don't have a full reading, you risk bricking the ECU, so be careful. Ask your tuner for advice on what to do. Normally, the tool does this automatically.
By Super pedzio
on May 29, 2024
0 votes
Q:Question:Did anyone experience the same problem with EDC17C50 BMW? When the power supply is at 13.9V, reading works fine, but writing sometimes blocks at 88% or 94%. Answer this question
A:Answer:
The KTM bench tool skips the OTP protection area, which is why it writes successfully. The manual solution is to use WinOLS. While Swiftec is expensive, it is not always perfect. The checksum from the tool works fine if it compares with orginal file.
yes ,bench ,checksum by tool. Bench is Safe and stable but i recommend use laboratory supply. And also use good solution if you brick this ecu you will have lot of problems.
![[EU Ship] ECUHELP KT200 II ECU TCU Programmer Full Version with Offline Workstation for Car Truck Motorbike Tractor Boat [Get one Free KTflash Dongle]](/uploads/item-x300/171136130037011118.webp)
![[Suitcase] ECUHELP KT200 ECU Programmer, Read Write Car Truck via OBD / on Bench / in Boot Jtag [Get Free KTflash]](/uploads/item-x300/171567677819843923.webp)