ECUHELP KT200 Plus ECU Programmer, Work Independently, Read / Write / Clone by OBD / Bench Mode, Support DTC off / Immo off / Tprot off

What is KT200 Plus? 
The KT200 Plus is a plug-in module ECU programmer designed to address the shortcomings of previous equipment and provide continuous function updates for future devices. It operates independently and supports online updates.

Features: 
1. ECUHELP KT200 Plus ECU Programmer, add More Read/Write/Clone Protocols for KT200 and KT200ll ,
2. Built-in DTC off and map modification function
NOTE: It supports OBD and Bench mode. Boot mode will be updated soon, and Denso will also be updated soon. 

KT200 Plus ECU Support List:
Check KT200 Plus Newest ECU list (it is as the same as KTflash) 
KT200 Plus supports DCM6.2AP series, DCM7.1AP Serial, EXX series, MG1US, UA008 Series, MXX Series, HITACHI 71XX, INFINEON Series, MEDC17 Series, Clone MEDC17 Series, Clone SIMOS Series, CRD2XX Series, CRD3XX Series, 6XX Series, MTXX Series, and more protocols will be updated soon.

After receiving the device, please connect the device to the computer and install the kt200 plus software. Then open the software and send the device ID to Oliver for activation.

The comparison table of KT200 Plus and KT200II：  

Feature	KT200 Plus	KT200II
Read/write ECU	Can read and write ECU alone.	Read / Write most of ECU in the market.
Supported Mode	Support OBD Mode and Bench mode, not yet support Boot mode, please wait for the update.	R/W ECU Bench/OBD/BOOT/BDM/Jtag Mode
ECU Service	File modification, DTC off, IMMO off, TPROT, etc.	Need the third part software to edit the ECU data.

What is the difference between KT200 Plus and KTFlash?
KT200 Plus = KTflash dongle + J2534 Hardware + all the licenses activated free for one year. 

KT200 Plus Support Online Update
Original from ECUHELP with free online updates for 1 year, subscription at 119 euro/year.

KT200 plus Free upgrade (April 129, 2025):
Added Siemens/Continental Electronics/E22 Series/Renault/Nissan/SID321 read and write FLASH function
Added Siemens/Continental Electronics/E19 Series/Mercedes-Benz/SID307 read and write EEPROM, FLASH function
Added Delphi/E11 Series/MT22.3 read and write FLASH function

KT200 plus Free upgrade (March 13, 2025):
HITACHI
Nissan SH70XX - Series
SH7059 CAN 
SH705519N CAN 
SH705822N CAN 
SH705827N CAN 
SH705828N CAN 
SH725331N CAN 
SH7253332N CAN 
SH705507N KLINE
SH705513N KLINE
SH705520N K-LINE
SH7055 CAN
SH7058 CAN

KT200 plus Free upgrade (January 16, 2025):
Honda/Keihin - Series
KEIHIN TC1782
KEIHIN MPC5566
KEIHIN SH7058
KEIHIN SH72543

KT200 plus Free upgrade (December 30, 2024):
E20 Honda
Honda/Keihin - Series
Keihin TC1782
KEIHIN MPC5566
KEIHIN SH7058
KEIHIN SH72543

KT200 plus Free upgrade (November 12, 2024):
Delphi
DCM2xx-Series
DCM2.5PNEW

Bosch:
ME7 - Series
ME7NEW

KT200 plus Free upgrade (October 16, 2024):
1. Added Delphi domestic MT series ECU reading and writing, covering BAIC, Great Wall, Geely, Chery, Changan, JAC and other ECU reading and writing
2. Added VAG series anti-theft shutdown function, such as: MG1CS001, MG1CS002, MG1CA811, MD1CS004, MG1CS008, MG1CS011, MG1CS111, MD1CP004, MD1CP014, MG1CS163
3. Added PSA series anti-theft shutdown function, such as: MD1CS003, MG1CS042
4. Optimized VAG series MED17.1.61, EDC17C74 anti-theft shutdown function
5. Optimized PSA series EDC17C10, EDC17C60, MEV17.4, MEV17.4.2, MEVD17.4 anti-theft shutdown function
6. Optimize the anti-theft shutdown function of KIA series EDC17C08, EDC17C53, EDC17CP62, ME17.9.11, ME17.9.11.1, ME17.9.21, ME17.9.21.1, MED17.9.8, MEG17.9.12, MEG17.9.13
7. Optimize the anti-theft shutdown function of domestic series ME17.8.8
8. Optimize the engine read and write functions of Bosch MD1CS018, MG1CA811, MG1CA007, MG1CS026, MG1CS032, MG1CA920, etc.
9. Optimize the fault code management function of MT/MG1/MEDC17
10. Optimize the read and write functions of some Volkswagen Delphi DCM6.2V

KT200 Plus Free Update (September 13, 2024)
Added Delphi DCM6.2V bench reading and writing (world's first), along with fault code management and immobilizer management functions.
Expanded coverage for Delphi MT62.1, MT92, MT95, and other models.
Increased coverage for MEDC17 models.
Added support for cloning Volkswagen Siemens SDI6, SDI7, SDI8, and IMMO OFF for the SIMOS series.
Added functions for diagnostic fault code reading and clearing.
Added support for the Italian language.

KT200 Plus Free Update (August 17, 2024)
EDC17 XX series /MEXX series
Read /Write/Clone/DTC off/Immo off/TPROT, Bench mode

KT200 plus Free upgrade (August 16, 2024): 
Add: EDC16/ME9 series

KT200 plus Free upgrade (July 27, 2024) 
Add: Clone Medc17 series，Clone Simes/Contient series

KT200 plus Free upgrade (July 5, 2024) 
Add: Medc17 series

KT200 plus Free upgrade (May 24, 2024) 
Add: MT XX series

KT200 Plus Package List: 
Carrying Case
KT200 Plus adapter
OBD cable
USB cable
OTB 2.0
Multifunctional cable
Power Plug
OTB2.0 inside the cable

What specific ECUs does the KT200 Plus read and write? Please refer to the following images.

 

---

We are dedicated to provide good support and assistance. If you have any questions, concerns, or inquiries, please don't hesitate to reach out to us. Our team is here to help!
Email: Sales@ECUHELPshop.com
Whatsapp: +86-18205996549
Skype: Sales@ECUHELPshop.com
Live Chat: Visit our website and click on the live chat option to chat with Oliver Liu in real-time.