ECUHELP KT200 full version supports Offline Workstation by installing one extra USB dongle (operation guide is listed below). ECUHELP KT200 auto version does not support Offline Workstation yet, but allow you upgrade to full version by charging.
How to install KT200 offline workstation?
1，Run setup to install KT200 software.
2, the software want to work offline,you have to build a local server,and please make sure the C drive has more than 15GB of space available.open the KT200_ftp folder,run offline installation.
3, run KT200 to work.
Tips: when it pops up "Please press button below to update firmware”, please plug KT200 device to the computer.
The black is the U disk, and the white is the dongle. Black U disk contains
software and installation instructions. It must be installed online before it can work offline.
Step 1. Plug in the device (image 1), run the setup, and install the KT200 software (image 2)
Step 2. After installing the KT200 software, make sure the C drive has a capacity of 15G or more.
Step 3. Make sure you have enough space to run the installation of KT200_ftp.
Step 4. After completing the installation, insert the dongle and run the KT200.exe program to complete the first update activation..
Step 5. Complete the activation and open the software.
KT200 USB dongle is required to connect network every 15 days, It only takes less than 1 seconds to connect the internet.
The purpose is that when there is newest software available, you will be informed instead of messaging the dealer to send.
If you failed to update the license of offline workstation, please feel free to contact at WhatsApp: +8618205996549.