Q:Question:KT200II online January ver. after successfully OBD read Peugeot Expert DCM6.2A saves empty file. Tested 2 times. File has 0bytes. Answer this question
A:Answer:
No vr on server.
By LauraSELLER
on February 17, 2024
0 votes
Q:Question:Anyone knows where to buy or how to make the D48CONN04 connectors? Answer this question
A:Answer:
do you have some pictures?
By IrisSELLER
on January 30, 2024
0 votes
Q:Question:Bonjour en obd je ne suis pas parvenue à lire ecu dcm 1.2 Renault Answer this question
A:Answer:
any error message?
By IrisSELLER
on November 23, 2023
0 votes
Q:Question:Bonjours es-que j'ai les même options pour htprog sans dongle en utilisation du kt200 Answer this question
A:Answer:
yes,At this time, kt200 is equivalent to the function of htprog dongle
By IrisSELLER
on November 23, 2023
1 votes
Q:Question:For your KT200, which voltage do you typically give? Answer this question
A:Answer:
On Bench mode, I apply 14.2 volts at 2 amps; for OBD mode, 60 amps at 13.5 volts ok. It's crucial to know what ecu that start pump/fan and bench it insted.
By Zboril
on November 2, 2023
It varies with the ECU. Usually, I start at 13 volts, though certain PCR2.1 require 13.5 volts, and there was one instance where I had to increase to 13.9 volts.
HW 001 & 002 work ok via obd, but takes around 2 hours to read and 15 min to write. If you want to do it faster i suggest to do via jtag, it is much safer. If it is hw003 remove SGW.
Q:Question:Can I use KT200 clone old ecm (VW Bosch Benzin me17.5.5 2011-01-31? Answer this question
A:Answer:
yes 1.1 clone, need internet connection.Follow the instructions in the clone protocol for this ecu.
By Mike
on October 27, 2023
0 votes
Q:Question:Hi, my kt200 has arrived. Where can I download software and should I use the tool original power adapter in the box or use another power adapter? Some people say you should use no switch mode adapter Answer this question
A:Answer:
the original power adapter is enough for most ecus BUT in some ecus more voltage is required, like 13.5-14v then you have to use a power source. And download software here: Download here: https://www.ecuhelpshop.com/pages/downloads/.
Q:Question:Is it safe for KT200 to read and write the BMW E91 EDC17CP02 via OBD? Answer this question
A:Answer:
It's more reliable on the Bench. bench no problem tested it with obd just to see it worked no problem, for reading and writing, ensure you have 13v. Also, have driver seetbelt on so ignition don't turn off.
These are capacitors some med17and edc17 require you to connect capacitors on gpt lines.
By Michael
on October 17, 2023
0 votes
Q:Question:Delphi DCM3.4 Read and write possible with KT200 via OBD? Answer this question
A:Answer:
Yes obd flash no problem.
By Sunny SmithSELLER
on October 17, 2023
0 votes
Q:Question:is it safe to read and write Sid307 Mercedes obd with Kt200? Answer this question
A:Answer:
Kt200 is safe to read and write Sid307 Renault via obd yes, Mercedes Benz No.
By David
on October 16, 2023
0 votes
Q:Question:Mersedes euro6 ağır vasıta araçlarda şanzıman beynini okurmu TCM beyni okuyup yazarmı onlarda eis kişileştirme olduğu için başka TCM beyni olmuyor okuyup yazarsa olur Answer this question
A:Answer:
you can check the support list of ecuhelp kt200 i just checked,but didnot find in the list
By IrisSELLER
on October 4, 2023
0 votes
Q:Question:Was ist durchschnittlich besser bzw vielfältiger, offline oder Vollversion? Answer this question
A:Answer:
ECUHELP KT200 ECU Programmer Offline Workstation and HTProg Clone Adapter Adds More ECU and TCU Types this version is kt200 full version+offline workstation+htprog clone adapter,more diverse,add more clone protocols.Can work online and offline
![[Get a Free KTflash Dongle]ECUHELP KT200 ECU Programmer Offline Workstation and HTProg Clone Adapter](/uploads/item-x300/171136135976208966.webp)
![[EU Ship] ECUHELP KT200 II ECU TCU Programmer Full Version with Offline Workstation for Car Truck Motorbike Tractor Boat [Get one Free KTflash Dongle]](/uploads/item-x300/171136130037011118.webp)