For those seeking to download and install the ECUHELP KT200II Offline Workstation, here's an easy-to-follow guide.

Part 1: ECUHELP KT200II Offline Workstation Download
To download the software, access the following sources:
Official Source: ECUHELPShop "Downloads" Section
Mega: Download Link
Google Drive: Download Link
Important: disable firewall and anti virus. 

Part 2: KT200II Offline Workstation Installation Guide
Prepare:  When installing the KT200II 2024 offline software, you need to plug the offline dongle. 

Follow these steps for a hassle-free installation:

1.Install KT200II Wizard
Installation Process:
Go to “This PC” and navigate to USB Drive (F:) -> KT200 Offline Setup -> KT200II Offline Installation Package (20231123_1) -> Setup.


Proceed by clicking on "Next" to initiate the Wizard.


Continue by clicking on "Next" again.

Select "Install" to commence the installation process.

Upon completion, click on "Finish" to conclude the setup of KT200II 2024 Offline version.


2.Folder Transfer:
Go to “This PC” -> Disk C - KT200 Offline - User.
Simultaneously, go to “This PC” -> USB Drive (F:) -> To User, and select all folders for copying.
Paste the copied folders into “Disk C - KT200 Offline - User” to complete the transfer.




3.Opening KT200II Offline
Follow these final steps:
Wait patiently for approximately 20 seconds for the software to launch.
Click on “Start KT200II” to commence using the KT200II Offline Workstation.


Next is to connect the ECU, read and write ECU. 

Watch video on the installation guide:


This simplified guide ensures a seamless download, installation, and access to the ECUHELP KT200II Offline Workstation for efficient use.