KT200 R/W BMW edc17c50 on bench ok.

KT200 R/W E83 on bench.

Edc16 U1 eeprom ok read and write.

Opel Insignia B 2.0TD with ECU E98, I read and wrote many on Bench 100% works .... All ok read CKS write... Don't try OBD!

Edc17cv42 work ok , cks by tool.

KT200 tested vw edc17c46 read and write flash on bench works 100%.

Delphi CRD2. 30, KT200 obd work perfect read and write,full backup is just in boot.

KT200 Read/write md1cp004 ok.

KT200 Read/Write more than 100 EDC15 without problem.

Tested Edc17c46 Edc17c60 Edc17c64 Edc17cp14 Edc17c10 Edc17cp20 Pcr2.1 (bench mode unlock eeprom. Read write flash with obd mode) All tested by me

Mercedes CRD3.20 bench read write 100%, work 100 cheksum ok.

Kt200 3 servers and works very well.

I have KT200 and I am very happy with how it works, never had any problems.

(Tested) more than 100 edc15 programmed by KT200 and not a single failure, you only have to do a manual checksum (using Winols/Lsuite/ Davinci), if you get KT200 from ecuhelpshop.com, you will get free Winols/Lsuite/ Davinci.

More than 100 edc15 programmed by KT200 and not a single failure, you only have to do a manual checksum. Use kess clone to be able to read Edc15 works much better who facilitates the files (make stage1 egr dpf first) if you use kt200 you have to fix the checksum if you do not lock.

KT200 Read/Write volvo edc16c31 on bench no Problem only have to do 1 dtc off which said error on ecu. Testet with checksum by tool, lsuite, winols all the same.

SID 211 FORD TRANSIT OBD OK (Just Read as normal) OFF ADBLUE FAP OK CHECKSUM OK

EDC16c39 I made hundreds of these drivers and never had an issue.

KT200 Bench read Bosch MED9.5.10 from audi A3 2005 1.6 fsi petrol, you have a backup ... 10 min work to take out off car. 3 clips at Wischer Arms.. take the Black plastic a bit up and remove ist .
it will write okay but you need a battery stabilizer connected to the car if you are to do via obd.
 

Edc17C60 I have done loads with no problems.